[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
-----BEGIN PGP SIGNED MESSAGE-----
howdy folks,
the purpose of this message is to announce the addition of Type I
capabilities to the remailer at [email protected].
[email protected] now supports the standard cpunk commands.
here's the section of the help file that pertains to the Type I
remailer, the whole help file available by sending a message to
[email protected] with Subject: remailer-help.
the Type I remailer is Matt Ghio's code. all commands are supported
EXCEPT usenet posting which would probably just get me in trouble.
the pgp key for the remailer is included in the message below. in
addition, you can obtain the key by fingering
[email protected].
the whole help file is also available by fingering
[email protected].
thanks,
- -patrick finerty
Part II - Type I remailer features
I have an automated mail handling program installed here which will take
any message with the proper headers and automatically re-send it anonymously.
You can use this by sending a message to [email protected], with the
header Anon-To: containing the address that you want to send anonymously to.
(Only one recipient address is permitted.) If you can't add headers to your
mail, you can place two colons on the first line of your message, followed
by the Anon-To line. Follow that with a blank line, and then begin your
message. For Example:
> From: [email protected]
> To: [email protected]
> Subject: Anonymous Mail
>
> ::
> Anon-To: [email protected]
>
> This is some anonymous mail.
The above would be delivered to [email protected] anonymously. All headers in
the original message are removed, with the exception of the Subject (and
Content-Type, if present). She would not know that it came from Joe, nor
would she be able to reply to the message.
However, if Beth suspected that Joe had sent the message, she could compare
the time that the message was received with the times that Joe was logged
in. However, this problem can be avoided by instructing the remailer to
delay the message, by using the Latent-Time header:
> From: [email protected]
> To: [email protected]
> Subject: Anonymous Mail
>
> ::
> Anon-To: [email protected]
> Latent-Time: +1:00
>
> This is some anonymous mail.
The above message would be delayed one hour from when it is sent. It is also
possible to create a random delay by adding an r to the time (ie +1:00r),
which would have the message be delivered at a random time, but not more
than an hour.
Another problem is that some mailers automatically insert a signature file.
Of course, this usually contains the senders email address, and so would
reveal their identity. The remailer software can be instructed to remove
a signature file with the header "Cutmarks". Any line beginning with the
same text at in the cutmarks header, and any lines following it will be
removed.
> From: [email protected]
> To: [email protected]
> Subject: Anonymous Mail
>
> ::
> Anon-To: [email protected]
> Cutmarks: --
>
> This line of text will be in the anonymous message.
> --
> This line of text will not be in the anonymous message.
You can add additional headers to the output message by preceeding them
with ##
> From: [email protected]
> To: [email protected]
> Subject: Nifty Anon Msg
>
> ::
> Anon-To: [email protected]
>
> ##
> Reply-To: [email protected]
>
> A Message with a reply address.
By seperating messages with cutmarks, you can send more than one message
at once:
> From: me@mysite
> To: [email protected]
> Subject: message 1
>
> ::
> Anon-To: [email protected]
> Cutmarks: --
>
> Message one.
> --
> ::
> Anon-To: [email protected]
>
> ##
> Subject: message 2
>
> Message two.
The two messages will be delivered seperately.
For added security, you can encrypt your messages to the remailer with PGP.
The remailer software will decrypt the message and send it on. Here is the
remailer's public key:
- -----BEGIN PGP PUBLIC KEY BLOCK-----
Version: 2.6.2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=ms21
- -----END PGP PUBLIC KEY BLOCK-----
To utilize this feature, create a message with two colons on the first line,
then the Anon-To line, then any other headers, such as cutmarks or latency,
then a blank line, and then the message. Encrypt this with the remailer's
public key. Then send it to the remailer, adding the header "Encrypted: PGP".
If you forget this, the remailer won't know that it needs to be decrypted.
Also be sure to use the -t option with PGP, or the linefeeds might not be
handled properly.
> To: [email protected]
> From: [email protected]
>
> ::
> Encrypted: PGP
>
> -----BEGIN PGP MESSAGE-----
> Version: 2.3a
>
> hIkCuMeAjnwmCTUBA+dfWcFk/fLRpm4ZM7A23iONxkOGDL6D0FyRi/r0P8+pH2gf
> Hai4+1BHUhXDCW2LfLfay5JwHBNMtcdbgXiQVXIm0cHM0zgf9hBroIM9W+B2Z07i
> 6UN3BDhiTSJBCTZUGQ7DrkltbgoyRhNTgrzQRR8FSQQXSo/cf4po0vCezKYAAABP
> smG6rgPhdtWlynKSZR6Gd2W3S/5pa+Qd+OD2nN1TWepINgjXVHrCt0kLOY6nVFNQ
> U7lPLDihXw/+PPJclxwvUeCSygmP+peB1lPrhSiAVA==
> =da+F
> -----END PGP MESSAGE-----
Any unencrypted text after the PGP message is also remailed. This is to
allow sending to someone who is anonymous. If you create a PGP-encrypted
message to yourself via my remailer, and then you give it to someone, they
can send you a message by sending the encrypted message to the remailer.
The remailer will then decrypt it and send it to you. The message gets
anonymized in the process, so the sender will need to include a return
address if he wants a reply.
Messages sent this way can be encrypted using the Encrypt-Key: feature.
Any text following a line beginning with ** will be encrypted with this
key. For example, if you put in your PGP message:
> ::
> Anon-To: [email protected]
> Encrypt-Key: your_password
>
> **
The appended message after the ** will be encrypted with the key
"your_password", using PGP's conventional encryption option.
Part III - Common Features
Can [email protected] post to News?
No. News posting is not supported at this time.
Abuse Policy:
I consider the following to be inappropriate use of this anonymous remailer,
and will take steps to prevent anyone from doing any of the following:
- - Sending messages intended primarilly to be harassing or annoying.
- - Use of the remailer for any illegal purpose.
If you don't want to receive anonymous mail, send me a message, and I will
add your email address to the block list.
"Those that give up essential liberty to obtain a little temporary
safety deserve neither liberty nor safety." -- Benjamin Franklin (1773)
finger for PGP key
zifi runs LINUX 1.3.57 -=-=-=WEB=-=-=-> http://zifi.genetics.utah.edu
-----BEGIN PGP SIGNATURE-----
Version: 2.6.2
Comment: Processed by mkpgp1.6, a Pine/PGP interface.
iQCVAwUBMRkfF03Qo/lG0AH5AQFJ9gQAly+8Jko2cikOh254fcl/j2/ts7S/hgeR
IpLNGHbJlT4BQtFZT6JT/e6cuijVt5x2u6pBVphRpAp/om033mwgIcMwYnIvDMEo
ijnxb6dskrdQf6zV9lRV7HJ4izIX85btI41e9VNDrIT/VVgsJ/MVPYYfB6xNdM9h
UbzGt/x9I58=
=AG+5
-----END PGP SIGNATURE-----