[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: Optical repeaters
>> > > Optical repeaters have to pass your signal through an intermediate
electronic
>> > > stage anyway, since we have no purely optical valve/transistor
>> > > equivalents (bosons don't interact with each other at all).
>> > This is not true. There is now a whole technology of optical
>> > amplifiers for fiber communications systems that used Ettrium doped
>> > fibers pumped with strong light from a laser at a slightly shorter
>> > wavelength. These fiber optical amplifiers have gains in the order of
>> > 10-12 db in a section of special doped fiber only about 10 feet long.
>Very nice! ;-) Flouride based amplifiers should be able to handle up
>to 16 channels. Using state of the art time-multiplex stuff of 10 Gb/sec
>gives a total throughput of 160 Gb/Sec.... smoking!
The flavor of optical amplifier and end equipment being deployed by one
large telecomm company (ahem) over the next couple of years
uses 8 colors, each at 2.4 Gbps (OC-48), giving about 20 Gbps,
which is about 10 times the current capacity (1.7 Gbps.)
(Some other telecomm companies are deploying 3-colors of OC-48.)
A nice thing about the optical amplifiers is that they have about triple
the range of the current regenerators, so one amplifier can replace about
16-24 regens,
reducing the amount of equipment that can fail and produce downtime.
Because of this increased capacity, it's a good time to upgrade to SONET rings
(which are dual rings that provide self-healing similar to FDDI's;
SONET self-repair typically takes 60 ms instead of the several minutes
to cross-connect the equivalent pile of T3s using current equipment.)
If the FBI wants to wiretap this stuff, they'll have to get on the ball :-)
#--
# Thanks; Bill
# Bill Stewart, [email protected] / [email protected] +1-415-442-2215
# http://www.idiom.com/~wcs Pager +1-408-787-1281
! Frank Zappa for President !