Re: rc4 speeds

[Bill Stewart <stewarts@ix.netcom.com>]

>>That 164 mb/sec figure for RC4's speed better be a typo, because I
>>can't even come close to that.  I wrote an Assembler subroutine that 
>>encrypts a 32,768 byte block, and called it 65536 times on a 
>>486/DX2-66, without doing any disk reads or writes.

First of all, is that megabytes, or megabits?  I've forgotten how
many instructions it takes to do RC4, but RC5 takes 8-10 per round per
pair of words encrypted, so it should do about 1/2 bit per instruction for
16-round.
Some processors can do more than one instruction per clock cycle,
though loads and stores are usually a bit slower.  But you only need to
load two words every 128-160 clocks, which is easy on a pipelined machine.
So maybe it's a typo, but it should be far faster than 164 kB/s.

#					Thanks;  Bill
# Bill Stewart, stewarts@ix.netcom.com, +1-415-442-2215