[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Precipice remailer open for business
The Precipice Remailer is now open for business!
Below, I have included the remailer-help file.
You can get this file by sending a message to:
[email protected]
with a subject of "remailer-help".
- David C. Lambert
[email protected]
[email protected]
================================================================================
This remailer supports both type II (Mixmaster) and type I (Ghio)
cypherpunks messages. Help files for both are below.
Both mailers have a 5 message reordering pool, with zero default latency.
Posting to Usenet is not supported.
I consider the following to be inappropriate use of this anonymous remailer,
and will take steps to prevent anyone from doing any of the following:
- Sending messages intended primarily to be harassing or annoying
(this includes spam/velveeta);
- Use of the remailer for any illegal purpose
(death threats, kiddie porn, etc).
Don't ruin this remailer for everyone by doing something stupid
and/or illegal, and I won't be forced to assist the authorities in
crushing you like an insect.
If you don't want to receive anonymous mail, send me a message, and I will
add your email address to the block list.
You can get a list of statistics on remailer usage by sending mail to
[email protected] with Subject: remailer-stats
Have a nice day.
- David C. Lambert
[email protected]
The type I PGP key is:
-----BEGIN PGP PUBLIC KEY BLOCK-----
Version: 2.6.2
mQCNAzAypWYAAAEEAMUFk7ue4Isn2u1FMtYhJBLbSmxSgUaBgs8EJNZZYExcfTCr
V+m8o2N3pYxzbjPRAZ/pv0N1Tg93Kh17/RSzEjR/y91aaBjePv36VYKwCS8KeeX+
4LDyboic5EVkiDt1eu2cI6LIrl9w7Fo1/3YzNvsMVJ1ki/v5Ie5wAysW17oJAAUR
tBttaXhtYXN0ZXJAbWl4LnByZWNpcGljZS5jb20=
=hVLK
-----END PGP PUBLIC KEY BLOCK-----
The Mixmaster key is:
precipice [email protected] 05fef5887ac55dfe7379d0ef4a2a0c4b 2.0.1
-----Begin Mix Key-----
05fef5887ac55dfe7379d0ef4a2a0c4b
258
AATIdI/+dQ3rsvREcdYsnJkd+zQKCkPerZsyDXmX
NaYjUTwMhiHHjl/e7Zqx/mUAUQnifQfg4KpHvBGL
a6rQUTQjRhhz8sOvynyJci4NTm8DFDjYdTpvnbjp
YPu7xNhSfg7fmqXuqCan1M/AmpU1r6sF6M6gA0W4
EpOqFaJo7g32xQAAAAAAAAAAAAAAAAAAAAAAAAAA
AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA
AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA
AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA
AAAAAAAAAAAAAAAAAAAAAQAB
-----End Mix Key-----
==============================
TYPE II INFO (Mixmaster 2.0.1)
==============================
This is a Mixmaster remailer. It provides an extremely high level of security.
To use it, you must have a client program to produce the messages.
This software is available from ftp://nately.ucsd.edu/pub/remail
Read the README file for instructions. This file is export restricted,
so it can not be retrieved directly.
Some information can be sent to you by the remailer by including the
following commands (one per message) in the subject line of mail to the
remailer.
remailer-help This file.
remailer-stats Usage statistics for the last 24 hours.
remailer-key The mixmaster key file for this remailer.
A list of remailers is available from ftp://nately.ucsd.edu/pub/remail,
http://nately.ucsd.edu/~loki/, and will be posted periodically to
alt.privacy.anon-server and other privacy related groups.
======================
TYPE 1 INFO (Ghio 2.0)
======================
I have an automated mail handling program installed here which will take
any message with the proper headers and automatically re-send it anonymously.
You can use this by sending a message to [email protected], with the
header Anon-To: containing the address that you want to send anonymously to.
(Only one recipient address is permitted.) If you can't add headers to your
mail, you can place two colons on the first line of your message, followed
by the Anon-To line. Follow that with a blank line, and then begin your
message. For Example:
> From: [email protected]
> To: [email protected]
> Subject: Anonymous Mail
>
> ::
> Anon-To: [email protected]
>
> This is some anonymous mail.
The above would be delivered to [email protected] anonymously. All headers in
the original message are removed, with the exception of the Subject (and
Content-Type, if present). She would not know that it came from Joe, nor
would she be able to reply to the message.
However, if Beth suspected that Joe had sent the message, she could compare
the time that the message was received with the times that Joe was logged
in. However, this problem can be avoided by instructing the remailer to
delay the message, by using the Latent-Time header:
> From: [email protected]
> To: [email protected]
> Subject: Anonymous Mail
>
> ::
> Anon-To: [email protected]
> Latent-Time: +1:00
>
> This is some anonymous mail.
The above message would be delayed one hour from when it is sent. It is also
possible to create a random delay by adding an r to the time (ie +1:00r),
which would have the message be delivered at a random time, but not more
than an hour.
Another problem is that some mailers automatically insert a signature file.
Of course, this usually contains the senders email address, and so would
reveal their identity. The remailer software can be instructed to remove
a signature file with the header "Cutmarks". Any line beginning with the
same text at in the cutmarks header, and any lines following it will be
removed.
> From: [email protected]
> To: [email protected]
> Subject: Anonymous Mail
>
> ::
> Anon-To: [email protected]
> Cutmarks: --
>
> This line of text will be in the anonymous message.
> --
> This line of text will not be in the anonymous message.
You can add additional headers to the output message by preceeding them
with ##
> From: [email protected]
> To: [email protected]
> Subject: Nifty Anon Msg
>
> ::
> Anon-To: [email protected]
>
> ##
> Reply-To: [email protected]
>
> A Message with a reply address.
By separating messages with cutmarks, you can send more than one message
at once:
> From: me@mysite
> To: [email protected]
> Subject: message 1
>
> ::
> Anon-To: [email protected]
> Cutmarks: --
>
> Message one.
> --
> ::
> Anon-To: [email protected]
>
> ##
> Subject: message 2
>
> Message two.
The two messages will be delivered separately.
For added security, you can encrypt your messages to the remailer with PGP.
The remailer software will decrypt the message and send it on. Here is the
remailer's public key:
-----BEGIN PGP PUBLIC KEY BLOCK-----
Version: 2.6.2
mQCNAzAypWYAAAEEAMUFk7ue4Isn2u1FMtYhJBLbSmxSgUaBgs8EJNZZYExcfTCr
V+m8o2N3pYxzbjPRAZ/pv0N1Tg93Kh17/RSzEjR/y91aaBjePv36VYKwCS8KeeX+
4LDyboic5EVkiDt1eu2cI6LIrl9w7Fo1/3YzNvsMVJ1ki/v5Ie5wAysW17oJAAUR
tBttaXhtYXN0ZXJAbWl4LnByZWNpcGljZS5jb20=
=hVLK
-----END PGP PUBLIC KEY BLOCK-----
To utilize this feature, create a message with two colons on the first line,
then the Anon-To line, then any other headers, such as cutmarks or latency,
then a blank line, and then the message. Encrypt this with the remailer's
public key. Then send it to the remailer, adding the header "Encrypted: PGP".
If you forget this, the remailer won't know that it needs to be decrypted.
Also be sure to use the -t option with PGP, or the linefeeds might not be
handled properly.
> To: [email protected]
> From: [email protected]
>
> ::
> Encrypted: PGP
>
> -----BEGIN PGP MESSAGE-----
> Version: 2.6.2
>
> hIkCuMeAjnwmCTUBA+dfWcFk/fLRpm4ZM7A23iONxkOGDL6D0FyRi/r0P8+pH2gf
> HAi4+1BHUhXDCW2LfLfay5JwHBNMtcdbgXiQVXIm0cHM0zgf9hBroIM9W+B2Z07i
> 6UN3BDhiTSJBCTZUGQ7DrkltbgoyRhNTgrzQRR8FSQQXSo/cf4po0vCezKYAAABP
> smG6rgPhdtWlynKSZR6Gd2W3S/5pa+Qd+OD2nN1TWepINgjXVHrCt0kLOY6nVFNQ
> U7lPLDihXw/+PPJclxwvUeCSygmP+peB1lPrhSiAVA==
> =da+F
> -----END PGP MESSAGE-----
Any unencrypted text after the PGP message is also remailed. This is to
allow sending to someone who is anonymous. If you create a PGP-encrypted
message to yourself via my remailer, and then you give it to someone, they
can send you a message by sending the encrypted message to the remailer.
The remailer will then decrypt it and send it to you. The message gets
anonymized in the process, so the sender will need to include a return
address if he wants a reply.
Messages sent this way can be encrypted using the Encrypt-Key: feature.
Any text following a line beginning with ** will be encrypted with this
key. For example, if you put in your PGP message:
> ::
> Anon-To: [email protected]
> Encrypt-Key: your_password
>
> **
The appended message after the ** will be encrypted with the key
"your_password", using PGP's conventional encryption option.